Adding more control for system entities like calculated temps/delivery temps, system on off status, and hygrostats for zones.

CLAUDE.md

@@ -46,8 +46,12 @@ When you change the target temperature, it writes to the appropriate setpoint ba
 │  __init__.py          Entry point, platform setup           │
 │  coordinator.py       Data polling, setpoint syncing        │
 │  climate.py           Climate entities (thermostats)        │
-│  switch.py            Season switch entity                  │
-│  sensor.py            Setpoint diagnostic sensors           │
+│  humidifier.py        Dehumidifier entities (humidity ctrl) │
+│  switch.py            Season + system activation switches   │
+│  select.py            Zone mode select entities             │
+│  sensor.py            Setpoint, temperature, dew point      │
+│  binary_sensor.py     Pump active sensors                   │
+│  number.py            Time setting entities                 │
 │  modbus_client.py     Async Modbus TCP communication        │
 │  config_flow.py       UI configuration wizard               │
 │  const.py             Constants and register addresses      │
@@ -68,21 +72,42 @@ When you change the target temperature, it writes to the appropriate setpoint ba
 | `__init__.py` | Integration setup, platform loading, lifecycle management |
 | `coordinator.py` | `RDZDataUpdateCoordinator` - polls Modbus every 30s, syncs linked thermostats |
 | `climate.py` | `RDZClimateEntity` - thermostat entities with season-based HVAC mode |
-| `switch.py` | `RDZSeasonSwitch` - global summer/winter mode control |
-| `sensor.py` | `RDZSetpointSensor` - diagnostic sensors showing both setpoints |
+| `humidifier.py` | `RDZDehumidifierEntity` - dehumidifier control with humidity setpoints |
+| `switch.py` | `RDZSeasonSwitch` + `RDZSystemActivationSwitch` - season and system control |
+| `select.py` | `RDZZoneModeSelect` - zone mode selection (Off/Man/Pgm/Pgm-Man) |
+| `sensor.py` | `RDZSetpointSensor`, `RDZDewPointSensor`, `RDZOutsideTemperatureSensor`, `RDZWaterTemperatureSensor` |
+| `binary_sensor.py` | `RDZPumpActiveBinarySensor` - pump running status |
+| `number.py` | `RDZTimeSettingNumber` - system time configuration |
 | `modbus_client.py` | `RDZModbusClient` - async Modbus TCP wrapper with connection management |
 | `config_flow.py` | Configuration UI for adding/configuring the integration |
 | `const.py` | Constants: register addresses, defaults, config keys |
 
 ## Modbus Register Map
 
+### Zone Registers
+
 | Register/Coil | Address | Description |
 |---------------|---------|-------------|
 | Coil 2 | 2 | Season (0=winter, 1=summer) |
 | Registers 300-363 | 300 + zone_id | Winter setpoints (value * 10) |
 | Registers 364-427 | 364 + zone_id | Summer setpoints (value * 10) |
+| Registers 428-491 | 428 + zone_id | Dehumidification setpoints (raw %, no scaling) |
 | Registers 2700-2763 | 2700 + zone_id | Current temperatures (value * 10, read-only) |
+| Registers 2828-2891 | 2828 + zone_id | Dew point temperatures (value * 10, read-only) |
 | Registers 2892-2895 | 2892 + (zone_id / 16) | Zone activity bitmasks (16-bit, read-only) |
+| Registers 5301-5364 | 5301 + zone_id | Zone mode (0=Off, 1=Man, 2=Pgm, 3=Pgm/Man) |
+| Registers 7701-7764 | 7701 + zone_id | Current humidity (value * 10, read-only) |
+
+### System Registers
+
+| Register/Coil | Address | Description |
+|---------------|---------|-------------|
+| Coils 100-107 | 100 + (system_id - 1) | System activation (1-8) |
+| Register 2600 | 2600 | Outside temperature (value * 10, read-only) |
+| Registers 2650-2657 | 2650 + (system_id - 1) | Delivery water temperatures 1-8 (value * 10, read-only) |
+| Registers 2658-2665 | 2658 + (system_id - 1) | Calculated water temperatures 1-8 (value * 10, read-only) |
+| Registers 5009-5013 | 5009-5013 | Time settings: Day, Month, Year, Hour, Minute |
+| Register 7615 | 7615 | Pump active bitmask (bit 0 = pump 1, read-only) |
 
 Temperature values are stored as integers with a scale factor of 10 (e.g., 21.5°C = 215).
 
@@ -96,6 +121,16 @@ Registers 2892-2895 contain 16-bit bitmasks indicating which zones are actively
 Bit = 1: Zone is actively heating/cooling
 Bit = 0: Zone is idle
 
+### Pump Active Bitmask
+Register 7615 contains an 8-bit bitmask indicating which pumps are currently running:
+- Bit 0: Pump 1 active
+- Bit 1: Pump 2 active
+- ...
+- Bit 7: Pump 8 active
+
+Bit = 1: Pump is running
+Bit = 0: Pump is idle
+
 ## Data Flow
 
 ### Reading Data (Coordinator)
@@ -103,8 +138,18 @@ Bit = 0: Zone is idle
    - All temperature registers (2700-2763)
    - Winter setpoints (300-363)
    - Summer setpoints (364-427)
+   - Dehumidification setpoints (428-491)
+   - Humidity values (7701-7764)
+   - Dew point temperatures (2828-2891)
+   - Zone modes (5301-5364)
    - Season coil (2)
    - Zone activity bitmasks (2892-2895)
+   - Outside temperature (2600)
+   - Time settings (5009-5013)
+   - System activation coils (100-107)
+   - Delivery water temperatures (2650-2657)
+   - Calculated water temperatures (2658-2665)
+   - Pump active bitmask (7615)
 2. Data stored in `coordinator.data` dictionary
 3. Entities update via `_handle_coordinator_update()`
 
@@ -135,9 +180,16 @@ For each configured zone:
 - 1x Climate entity (thermostat)
 - 1x Winter setpoint sensor (diagnostic)
 - 1x Summer setpoint sensor (diagnostic)
+- 1x Dew point sensor (diagnostic)
 
-System-level:
-- 1x Season switch
+System-level (on the "RDZ HMI System" device):
+- 1x Season switch (summer/winter mode)
+- 8x System activation switches (System 1-8)
+- 1x Outside temperature sensor
+- 8x Delivery water temperature sensors (1-8)
+- 8x Calculated water temperature sensors (1-8)
+- 8x Pump active binary sensors (1-8)
+- 5x Time setting number entities (Day, Month, Year, Hour, Minute)
 
 ## Configuration
 

README.md

@@ -11,6 +11,11 @@ A custom Home Assistant integration for controlling RDZ Graphic Tablet (HMI) the
 - Global season switch to toggle between heating and cooling
 - Automatic setpoint synchronization between real and virtual thermostats
 - Real-time temperature monitoring
+- Outside temperature sensor
+- Water temperature monitoring (delivery and calculated temperatures for 8 systems)
+- Pump status monitoring (8 pumps)
+- System activation control (8 systems)
+- System time configuration (day, month, year, hour, minute)
 
 ## Prerequisites
 
@@ -125,6 +130,25 @@ When you link a real thermostat to a virtual one:
 - The virtual thermostat's setpoint stays synchronized automatically
 - This allows you to use the physical thermostat dial to control cooling temperature
 
+### System-Level Entities
+
+The integration creates a "RDZ HMI System" device with the following entities:
+
+**Sensors:**
+- **Outside Temperature**: Current outdoor temperature from the system
+- **Delivery Water Temperature 1-8**: Actual water temperatures being delivered by each system
+- **Calculated Water Temperature 1-8**: Target water temperatures calculated by each system
+
+**Binary Sensors:**
+- **Pump 1-8 Active**: Shows whether each circulation pump is currently running
+
+**Switches:**
+- **Season Switch**: Controls global heating/cooling mode
+- **System 1-8**: Enable/disable each heating/cooling system
+
+**Number Entities:**
+- **Day, Month, Year, Hour, Minute**: Configure the RDZ system's internal clock
+
 ## Troubleshooting
 
 ### Thermostats show "Unavailable"

custom_components/rdz_hmi_control/__init__.py

@@ -13,7 +13,15 @@ from .coordinator import RDZDataUpdateCoordinator
 
 _LOGGER = logging.getLogger(__name__)
 
-PLATFORMS: list[Platform] = [Platform.CLIMATE, Platform.SENSOR, Platform.SWITCH]
+PLATFORMS: list[Platform] = [
+    Platform.BINARY_SENSOR,
+    Platform.CLIMATE,
+    Platform.HUMIDIFIER,
+    Platform.NUMBER,
+    Platform.SELECT,
+    Platform.SENSOR,
+    Platform.SWITCH,
+]
 
 
 async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:

custom_components/rdz_hmi_control/binary_sensor.py

@@ -0,0 +1,87 @@
+"""Binary sensor platform for RDZ HMI Control integration."""
+
+from __future__ import annotations
+
+import logging
+
+from homeassistant.components.binary_sensor import (
+    BinarySensorDeviceClass,
+    BinarySensorEntity,
+)
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant, callback
+from homeassistant.helpers.device_registry import DeviceInfo
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.helpers.update_coordinator import CoordinatorEntity
+
+from .const import (
+    DATA_PUMP_ACTIVE,
+    DOMAIN,
+)
+from .coordinator import RDZDataUpdateCoordinator
+
+_LOGGER = logging.getLogger(__name__)
+
+
+async def async_setup_entry(
+    hass: HomeAssistant,
+    config_entry: ConfigEntry,
+    async_add_entities: AddEntitiesCallback,
+) -> None:
+    """Set up RDZ HMI binary sensor entities from a config entry."""
+    coordinator: RDZDataUpdateCoordinator = hass.data[DOMAIN][config_entry.entry_id]
+
+    entities: list[BinarySensorEntity] = []
+
+    # Add pump active binary sensors (1-8)
+    for pump_id in range(1, 9):
+        entities.append(RDZPumpActiveBinarySensor(coordinator, pump_id))
+
+    async_add_entities(entities)
+
+
+class RDZPumpActiveBinarySensor(CoordinatorEntity[RDZDataUpdateCoordinator], BinarySensorEntity):
+    """Representation of an RDZ HMI pump active binary sensor."""
+
+    _attr_has_entity_name = True
+    _attr_device_class = BinarySensorDeviceClass.RUNNING
+
+    def __init__(
+        self,
+        coordinator: RDZDataUpdateCoordinator,
+        pump_id: int,
+    ) -> None:
+        """Initialize the pump active binary sensor entity.
+
+        Args:
+            coordinator: The data coordinator.
+            pump_id: The pump ID (1-8).
+        """
+        super().__init__(coordinator)
+        self._pump_id = pump_id
+
+        self._attr_unique_id = f"{DOMAIN}_{coordinator.client.host}_pump_{pump_id}_active"
+        self._attr_translation_key = f"pump_{pump_id}_active"
+        self._attr_name = f"Pump {pump_id} active"
+
+        # Place on the System device
+        self._attr_device_info = DeviceInfo(
+            identifiers={(DOMAIN, f"{coordinator.client.host}_system")},
+            name="RDZ HMI System",
+            manufacturer="RDZ",
+            model="HMI Control System",
+            sw_version="1.0",
+        )
+
+    @property
+    def is_on(self) -> bool | None:
+        """Return True if the pump is active."""
+        if self.coordinator.data is None:
+            return None
+        pump_active = self.coordinator.data.get(DATA_PUMP_ACTIVE, {})
+        return pump_active.get(self._pump_id)
+
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        self.async_write_ha_state()

custom_components/rdz_hmi_control/const.py

@@ -23,6 +23,35 @@ COIL_SEASON = 2  # 0 = winter, 1 = summer
 REGISTER_ACTIVITY_START = 2892
 REGISTER_ACTIVITY_COUNT = 4
 
+# Humidity registers
+REGISTER_HUMIDITY_START = 7701
+REGISTER_HUMIDITY_COUNT = 64
+
+# Summer dehumidification setpoint registers
+REGISTER_DEHUMIDIFICATION_SETPOINT_START = 428
+REGISTER_DEHUMIDIFICATION_SETPOINT_COUNT = 64
+
+# Dew point registers
+REGISTER_DEW_POINT_START = 2828
+REGISTER_DEW_POINT_COUNT = 64
+
+# Zone mode registers
+REGISTER_ZONE_MODE_START = 5301
+REGISTER_ZONE_MODE_COUNT = 64
+
+# Zone mode values
+ZONE_MODE_OFF = 0
+ZONE_MODE_MAN = 1
+ZONE_MODE_PGM = 2
+ZONE_MODE_PGM_MAN = 3
+
+ZONE_MODE_OPTIONS = {
+    ZONE_MODE_OFF: "Off",
+    ZONE_MODE_MAN: "Man",
+    ZONE_MODE_PGM: "Pgm",
+    ZONE_MODE_PGM_MAN: "Pgm/Man",
+}
+
 # Config keys
 CONF_HOST = "host"
 CONF_PORT = "port"
@@ -46,6 +75,10 @@ DATA_WINTER_SETPOINTS = "winter_setpoints"
 DATA_SUMMER_SETPOINTS = "summer_setpoints"
 DATA_SEASON = "season"  # True = summer, False = winter
 DATA_ZONE_ACTIVITY = "zone_activity"  # dict[int, bool] - zone_id -> is_active
+DATA_HUMIDITY = "humidity"
+DATA_DEHUMIDIFICATION_SETPOINTS = "dehumidification_setpoints"
+DATA_DEW_POINTS = "dew_points"
+DATA_ZONE_MODES = "zone_modes"
 
 # Temperature scale factor (Modbus returns values * 10)
 TEMP_SCALE_FACTOR = 10.0
@@ -54,3 +87,38 @@ TEMP_SCALE_FACTOR = 10.0
 MIN_TEMP = 5.0
 MAX_TEMP = 35.0
 TEMP_STEP = 0.5
+
+# Humidity limits
+MIN_HUMIDITY = 30
+MAX_HUMIDITY = 90
+
+# Outside temperature register
+REGISTER_OUTSIDE_TEMP = 2600
+
+# Time settings registers (Day, Month, Year, Hour, Minute)
+REGISTER_TIME_DAY = 5009
+REGISTER_TIME_MONTH = 5010
+REGISTER_TIME_YEAR = 5011
+REGISTER_TIME_HOUR = 5012
+REGISTER_TIME_MINUTE = 5013
+
+# System activation coils
+COIL_SYSTEM_ACTIVATION_START = 100
+COIL_SYSTEM_ACTIVATION_COUNT = 8
+
+# Water temperature registers
+REGISTER_DELIVERY_WATER_TEMP_START = 2650
+REGISTER_DELIVERY_WATER_TEMP_COUNT = 8
+REGISTER_CALCULATED_WATER_TEMP_START = 2658
+REGISTER_CALCULATED_WATER_TEMP_COUNT = 8
+
+# Pump active bitmask register
+REGISTER_PUMP_ACTIVE = 7615
+
+# Data keys for new features
+DATA_OUTSIDE_TEMP = "outside_temperature"
+DATA_TIME_SETTINGS = "time_settings"
+DATA_SYSTEM_ACTIVATION = "system_activation"
+DATA_DELIVERY_WATER_TEMPS = "delivery_water_temps"
+DATA_CALCULATED_WATER_TEMPS = "calculated_water_temps"
+DATA_PUMP_ACTIVE = "pump_active"

custom_components/rdz_hmi_control/coordinator.py

@@ -17,11 +17,21 @@ from .const import (
     CONF_PORT,
     CONF_ZONE_TYPE,
     CONF_ZONES,
+    DATA_CALCULATED_WATER_TEMPS,
+    DATA_DEHUMIDIFICATION_SETPOINTS,
+    DATA_DELIVERY_WATER_TEMPS,
+    DATA_DEW_POINTS,
+    DATA_HUMIDITY,
+    DATA_OUTSIDE_TEMP,
+    DATA_PUMP_ACTIVE,
     DATA_SEASON,
     DATA_SUMMER_SETPOINTS,
+    DATA_SYSTEM_ACTIVATION,
     DATA_TEMPERATURES,
+    DATA_TIME_SETTINGS,
     DATA_WINTER_SETPOINTS,
     DATA_ZONE_ACTIVITY,
+    DATA_ZONE_MODES,
     DEFAULT_PORT,
     DEFAULT_SCAN_INTERVAL,
     DOMAIN,
@@ -70,6 +80,18 @@ class RDZDataUpdateCoordinator(DataUpdateCoordinator[dict[str, Any]]):
             summer_setpoints = await self.client.read_summer_setpoints()
             season = await self.client.read_season()
             zone_activity = await self.client.read_zone_activity()
+            humidity = await self.client.read_humidity()
+            dehumidification_setpoints = await self.client.read_dehumidification_setpoints()
+            dew_points = await self.client.read_dew_points()
+            zone_modes = await self.client.read_zone_modes()
+
+            # Read new system-level data
+            outside_temp = await self.client.read_outside_temperature()
+            time_settings = await self.client.read_time_settings()
+            system_activation = await self.client.read_system_activation()
+            delivery_water_temps = await self.client.read_delivery_water_temps()
+            calculated_water_temps = await self.client.read_calculated_water_temps()
+            pump_active = await self.client.read_pump_active()
 
             if temperatures is None or winter_setpoints is None or summer_setpoints is None:
                 raise UpdateFailed("Failed to read data from Modbus device")
@@ -86,6 +108,17 @@ class RDZDataUpdateCoordinator(DataUpdateCoordinator[dict[str, Any]]):
                 DATA_SUMMER_SETPOINTS: summer_setpoints,
                 DATA_SEASON: season,  # True = summer, False = winter, None = unknown
                 DATA_ZONE_ACTIVITY: zone_activity,  # dict of zone_id -> is_active
+                DATA_HUMIDITY: humidity,
+                DATA_DEHUMIDIFICATION_SETPOINTS: dehumidification_setpoints,
+                DATA_DEW_POINTS: dew_points,
+                DATA_ZONE_MODES: zone_modes,
+                # New system-level data
+                DATA_OUTSIDE_TEMP: outside_temp,
+                DATA_TIME_SETTINGS: time_settings,
+                DATA_SYSTEM_ACTIVATION: system_activation,
+                DATA_DELIVERY_WATER_TEMPS: delivery_water_temps,
+                DATA_CALCULATED_WATER_TEMPS: calculated_water_temps,
+                DATA_PUMP_ACTIVE: pump_active,
             }
 
         except Exception as ex:
@@ -177,6 +210,64 @@ class RDZDataUpdateCoordinator(DataUpdateCoordinator[dict[str, Any]]):
 
         return success
 
+    async def async_set_dehumidification_setpoint(
+        self, zone_id: int, humidity: float
+    ) -> bool:
+        """Set the dehumidification setpoint for a zone."""
+        success = await self.client.write_dehumidification_setpoint(zone_id, humidity)
+        if success:
+            await self.async_request_refresh()
+        return success
+
+    async def async_set_zone_mode(self, zone_id: int, mode: int) -> bool:
+        """Set the zone mode for a zone."""
+        success = await self.client.write_zone_mode(zone_id, mode)
+        if success:
+            await self.async_request_refresh()
+        return success
+
+    async def async_set_system_activation(self, system_id: int, is_on: bool) -> bool:
+        """Set system activation for a system (1-8)."""
+        success = await self.client.write_system_activation(system_id, is_on)
+        if success:
+            await self.async_request_refresh()
+        return success
+
+    async def async_set_time_day(self, day: int) -> bool:
+        """Set the day value."""
+        success = await self.client.write_time_day(day)
+        if success:
+            await self.async_request_refresh()
+        return success
+
+    async def async_set_time_month(self, month: int) -> bool:
+        """Set the month value."""
+        success = await self.client.write_time_month(month)
+        if success:
+            await self.async_request_refresh()
+        return success
+
+    async def async_set_time_year(self, year: int) -> bool:
+        """Set the year value."""
+        success = await self.client.write_time_year(year)
+        if success:
+            await self.async_request_refresh()
+        return success
+
+    async def async_set_time_hour(self, hour: int) -> bool:
+        """Set the hour value."""
+        success = await self.client.write_time_hour(hour)
+        if success:
+            await self.async_request_refresh()
+        return success
+
+    async def async_set_time_minute(self, minute: int) -> bool:
+        """Set the minute value."""
+        success = await self.client.write_time_minute(minute)
+        if success:
+            await self.async_request_refresh()
+        return success
+
     async def async_shutdown(self) -> None:
         """Disconnect from the Modbus device."""
         await self.client.disconnect()

custom_components/rdz_hmi_control/humidifier.py

@@ -0,0 +1,174 @@
+"""Humidifier platform for RDZ HMI Control integration."""
+
+from __future__ import annotations
+
+import logging
+from typing import Any
+
+from homeassistant.components.humidifier import (
+    HumidifierDeviceClass,
+    HumidifierEntity,
+    HumidifierEntityFeature,
+)
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant, callback
+from homeassistant.helpers.device_registry import DeviceInfo
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.helpers.update_coordinator import CoordinatorEntity
+
+from .const import (
+    CONF_ZONE_NAME,
+    CONF_ZONES,
+    DATA_DEHUMIDIFICATION_SETPOINTS,
+    DATA_HUMIDITY,
+    DOMAIN,
+    MAX_HUMIDITY,
+    MIN_HUMIDITY,
+)
+from .coordinator import RDZDataUpdateCoordinator
+
+_LOGGER = logging.getLogger(__name__)
+
+
+async def async_setup_entry(
+    hass: HomeAssistant,
+    config_entry: ConfigEntry,
+    async_add_entities: AddEntitiesCallback,
+) -> None:
+    """Set up RDZ HMI dehumidifier entities from a config entry."""
+    coordinator: RDZDataUpdateCoordinator = hass.data[DOMAIN][config_entry.entry_id]
+    zones_config = config_entry.data.get(CONF_ZONES, {})
+
+    entities = []
+    for zone_id_str, zone_data in zones_config.items():
+        zone_id = int(zone_id_str) if isinstance(zone_id_str, str) else zone_id_str
+        entities.append(RDZDehumidifierEntity(coordinator, zone_id, zone_data))
+
+    async_add_entities(entities)
+
+
+class RDZDehumidifierEntity(
+    CoordinatorEntity[RDZDataUpdateCoordinator], HumidifierEntity
+):
+    """Representation of an RDZ HMI dehumidifier entity."""
+
+    _attr_has_entity_name = True
+    _attr_device_class = HumidifierDeviceClass.DEHUMIDIFIER
+    _attr_supported_features = HumidifierEntityFeature(0)
+    _attr_min_humidity = MIN_HUMIDITY
+    _attr_max_humidity = MAX_HUMIDITY
+
+    def __init__(
+        self,
+        coordinator: RDZDataUpdateCoordinator,
+        zone_id: int,
+        zone_data: dict[str, Any],
+    ) -> None:
+        """Initialize the dehumidifier entity."""
+        super().__init__(coordinator)
+        self._zone_id = zone_id
+        self._zone_data = zone_data
+
+        self._attr_unique_id = (
+            f"{DOMAIN}_{coordinator.client.host}_{zone_id}_dehumidifier"
+        )
+        self._attr_translation_key = "dehumidifier"
+        self._attr_name = "Dehumidifier"
+
+        self._update_device_info()
+
+    def _update_device_info(self) -> None:
+        """Update device info from zone data."""
+        zones_config = self.coordinator.config_entry.data.get(CONF_ZONES, {})
+        zone_data = zones_config.get(str(self._zone_id), self._zone_data)
+        self._zone_data = zone_data
+
+        zone_name = zone_data.get(CONF_ZONE_NAME, f"Zone {self._zone_id}")
+
+        self._attr_device_info = DeviceInfo(
+            identifiers={(DOMAIN, f"{self.coordinator.client.host}_{self._zone_id}")},
+            name=zone_name,
+            manufacturer="RDZ",
+            model="HMI Thermostat",
+            sw_version="1.0",
+        )
+
+    @property
+    def is_on(self) -> bool:
+        """Return True if the dehumidifier is on.
+
+        The dehumidifier is always considered 'on' as it's system-controlled.
+        """
+        return True
+
+    @property
+    def current_humidity(self) -> float | None:
+        """Return the current humidity."""
+        if self.coordinator.data is None:
+            return None
+
+        humidity_data = self.coordinator.data.get(DATA_HUMIDITY, {})
+        return humidity_data.get(self._zone_id)
+
+    @property
+    def target_humidity(self) -> float | None:
+        """Return the target humidity (dehumidification setpoint)."""
+        if self.coordinator.data is None:
+            return None
+
+        setpoints = self.coordinator.data.get(DATA_DEHUMIDIFICATION_SETPOINTS, {})
+        return setpoints.get(self._zone_id)
+
+    async def async_set_humidity(self, humidity: int) -> None:
+        """Set the target humidity (dehumidification setpoint)."""
+        success = await self.coordinator.async_set_dehumidification_setpoint(
+            self._zone_id, float(humidity)
+        )
+        if not success:
+            _LOGGER.error(
+                "Failed to set dehumidification setpoint for zone %d", self._zone_id
+            )
+
+    async def async_turn_on(self, **kwargs: Any) -> None:
+        """Turn on the dehumidifier.
+
+        The dehumidifier is system-controlled, so this is a no-op.
+        """
+        _LOGGER.debug(
+            "Dehumidifier turn_on called for zone %d, but system is auto-controlled",
+            self._zone_id,
+        )
+
+    async def async_turn_off(self, **kwargs: Any) -> None:
+        """Turn off the dehumidifier.
+
+        The dehumidifier is system-controlled, so this is a no-op.
+        """
+        _LOGGER.debug(
+            "Dehumidifier turn_off called for zone %d, but system is auto-controlled",
+            self._zone_id,
+        )
+
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        self._update_device_info()
+        self.async_write_ha_state()
+
+    async def async_added_to_hass(self) -> None:
+        """When entity is added to hass."""
+        await super().async_added_to_hass()
+
+        # Listen for config entry updates
+        self.async_on_remove(
+            self.coordinator.config_entry.add_update_listener(
+                self._async_config_entry_updated
+            )
+        )
+
+    async def _async_config_entry_updated(
+        self, hass: HomeAssistant, entry: ConfigEntry
+    ) -> None:
+        """Handle config entry update."""
+        self._update_device_info()
+        self.async_write_ha_state()

custom_components/rdz_hmi_control/modbus_client.py

@@ -8,14 +8,35 @@ from pymodbus.exceptions import ModbusException
 
 from .const import (
     COIL_SEASON,
+    COIL_SYSTEM_ACTIVATION_START,
+    COIL_SYSTEM_ACTIVATION_COUNT,
     REGISTER_ACTIVITY_COUNT,
     REGISTER_ACTIVITY_START,
+    REGISTER_CALCULATED_WATER_TEMP_COUNT,
+    REGISTER_CALCULATED_WATER_TEMP_START,
+    REGISTER_DEHUMIDIFICATION_SETPOINT_COUNT,
+    REGISTER_DEHUMIDIFICATION_SETPOINT_START,
+    REGISTER_DELIVERY_WATER_TEMP_COUNT,
+    REGISTER_DELIVERY_WATER_TEMP_START,
+    REGISTER_DEW_POINT_COUNT,
+    REGISTER_DEW_POINT_START,
+    REGISTER_HUMIDITY_COUNT,
+    REGISTER_HUMIDITY_START,
+    REGISTER_OUTSIDE_TEMP,
+    REGISTER_PUMP_ACTIVE,
     REGISTER_TEMP_START,
     REGISTER_TEMP_COUNT,
+    REGISTER_TIME_DAY,
+    REGISTER_TIME_HOUR,
+    REGISTER_TIME_MINUTE,
+    REGISTER_TIME_MONTH,
+    REGISTER_TIME_YEAR,
     REGISTER_WINTER_SETPOINT_START,
     REGISTER_WINTER_SETPOINT_COUNT,
     REGISTER_SUMMER_SETPOINT_START,
     REGISTER_SUMMER_SETPOINT_COUNT,
+    REGISTER_ZONE_MODE_COUNT,
+    REGISTER_ZONE_MODE_START,
     TEMP_SCALE_FACTOR,
 )
 
@@ -231,6 +252,81 @@ class RDZModbusClient:
         value = int(temperature * TEMP_SCALE_FACTOR)
         return await self.write_register(address, value)
 
+    async def read_humidity(self) -> dict[int, float] | None:
+        """Read all humidity registers and return dict of zone_id -> humidity %.
+
+        Values are stored as integer * 10 (e.g., 55.0% = 550).
+        """
+        registers = await self.read_registers(
+            REGISTER_HUMIDITY_START, REGISTER_HUMIDITY_COUNT
+        )
+        if registers is None:
+            return None
+
+        return {i: value / TEMP_SCALE_FACTOR for i, value in enumerate(registers)}
+
+    async def read_dehumidification_setpoints(self) -> dict[int, int] | None:
+        """Read all dehumidification setpoint registers.
+
+        Values are stored as raw percentage (e.g., 50% = 50).
+        """
+        registers = await self.read_registers(
+            REGISTER_DEHUMIDIFICATION_SETPOINT_START,
+            REGISTER_DEHUMIDIFICATION_SETPOINT_COUNT,
+        )
+        if registers is None:
+            return None
+
+        return {i: value for i, value in enumerate(registers)}
+
+    async def write_dehumidification_setpoint(
+        self, zone_id: int, humidity: int
+    ) -> bool:
+        """Write a dehumidification setpoint for a zone.
+
+        Args:
+            zone_id: The zone ID (0-63).
+            humidity: The target humidity percentage (e.g., 50).
+        """
+        address = REGISTER_DEHUMIDIFICATION_SETPOINT_START + zone_id
+        return await self.write_register(address, humidity)
+
+    async def read_dew_points(self) -> dict[int, float] | None:
+        """Read all dew point registers.
+
+        Values are stored as integer * 10 (e.g., 15.5°C = 155).
+        """
+        registers = await self.read_registers(
+            REGISTER_DEW_POINT_START, REGISTER_DEW_POINT_COUNT
+        )
+        if registers is None:
+            return None
+
+        return {i: value / TEMP_SCALE_FACTOR for i, value in enumerate(registers)}
+
+    async def read_zone_modes(self) -> dict[int, int] | None:
+        """Read all zone mode registers.
+
+        Returns dict of zone_id -> mode (0=Off, 1=Man, 2=Pgm, 3=Pgm/Man).
+        """
+        registers = await self.read_registers(
+            REGISTER_ZONE_MODE_START, REGISTER_ZONE_MODE_COUNT
+        )
+        if registers is None:
+            return None
+
+        return {i: value for i, value in enumerate(registers)}
+
+    async def write_zone_mode(self, zone_id: int, mode: int) -> bool:
+        """Write a zone mode.
+
+        Args:
+            zone_id: The zone ID (0-63).
+            mode: The mode value (0=Off, 1=Man, 2=Pgm, 3=Pgm/Man).
+        """
+        address = REGISTER_ZONE_MODE_START + zone_id
+        return await self.write_register(address, mode)
+
     async def discover_zones(self) -> list[int]:
         """Discover active zones by reading temperature registers."""
         temperatures = await self.read_temperatures()
@@ -246,3 +342,129 @@ class RDZModbusClient:
         # Try reading temperature registers as a connection test
         result = await self.read_registers(REGISTER_TEMP_START, 1)
         return result is not None
+
+    async def read_outside_temperature(self) -> float | None:
+        """Read the outside temperature from register 2600.
+
+        Value is stored as integer * 10 (e.g., 21.5°C = 215).
+        """
+        registers = await self.read_registers(REGISTER_OUTSIDE_TEMP, 1)
+        if registers is None:
+            return None
+        return registers[0] / TEMP_SCALE_FACTOR
+
+    async def read_time_settings(self) -> dict[str, int] | None:
+        """Read time settings from registers 5009-5013.
+
+        Returns dict with keys: day, month, year, hour, minute
+        """
+        registers = await self.read_registers(REGISTER_TIME_DAY, 5)
+        if registers is None:
+            return None
+        return {
+            "day": registers[0],
+            "month": registers[1],
+            "year": registers[2],
+            "hour": registers[3],
+            "minute": registers[4],
+        }
+
+    async def write_time_day(self, day: int) -> bool:
+        """Write the day value to register 5009."""
+        return await self.write_register(REGISTER_TIME_DAY, day)
+
+    async def write_time_month(self, month: int) -> bool:
+        """Write the month value to register 5010."""
+        return await self.write_register(REGISTER_TIME_MONTH, month)
+
+    async def write_time_year(self, year: int) -> bool:
+        """Write the year value to register 5011."""
+        return await self.write_register(REGISTER_TIME_YEAR, year)
+
+    async def write_time_hour(self, hour: int) -> bool:
+        """Write the hour value to register 5012."""
+        return await self.write_register(REGISTER_TIME_HOUR, hour)
+
+    async def write_time_minute(self, minute: int) -> bool:
+        """Write the minute value to register 5013."""
+        return await self.write_register(REGISTER_TIME_MINUTE, minute)
+
+    async def read_coils(self, address: int, count: int) -> list[bool] | None:
+        """Read multiple coils from the Modbus device."""
+        async with self._lock:
+            if not await self._connect_unlocked():
+                return None
+
+            try:
+                result = await self._client.read_coils(address=address, count=count)
+                if result.isError():
+                    _LOGGER.error("Error reading coils at %d: %s", address, result)
+                    return None
+                return list(result.bits[:count])
+            except ModbusException as ex:
+                _LOGGER.error("Modbus exception reading coils at %d: %s", address, ex)
+                return None
+            except Exception as ex:
+                _LOGGER.error("Unexpected error reading coils at %d: %s", address, ex)
+                return None
+
+    async def read_system_activation(self) -> dict[int, bool] | None:
+        """Read system activation coils 100-107.
+
+        Returns dict of system_id (1-8) -> is_on (True/False).
+        """
+        coils = await self.read_coils(COIL_SYSTEM_ACTIVATION_START, COIL_SYSTEM_ACTIVATION_COUNT)
+        if coils is None:
+            return None
+        return {i + 1: coils[i] for i in range(COIL_SYSTEM_ACTIVATION_COUNT)}
+
+    async def write_system_activation(self, system_id: int, is_on: bool) -> bool:
+        """Write a system activation coil.
+
+        Args:
+            system_id: The system ID (1-8).
+            is_on: Whether to activate (True) or deactivate (False).
+        """
+        if not 1 <= system_id <= 8:
+            _LOGGER.error("Invalid system_id %d, must be 1-8", system_id)
+            return False
+        address = COIL_SYSTEM_ACTIVATION_START + (system_id - 1)
+        return await self.write_coil(address, is_on)
+
+    async def read_delivery_water_temps(self) -> dict[int, float] | None:
+        """Read delivery water temperatures from registers 2650-2657.
+
+        Returns dict of system_id (1-8) -> temperature.
+        Values are stored as integer * 10.
+        """
+        registers = await self.read_registers(
+            REGISTER_DELIVERY_WATER_TEMP_START, REGISTER_DELIVERY_WATER_TEMP_COUNT
+        )
+        if registers is None:
+            return None
+        return {i + 1: value / TEMP_SCALE_FACTOR for i, value in enumerate(registers)}
+
+    async def read_calculated_water_temps(self) -> dict[int, float] | None:
+        """Read calculated water temperatures from registers 2658-2665.
+
+        Returns dict of system_id (1-8) -> temperature.
+        Values are stored as integer * 10.
+        """
+        registers = await self.read_registers(
+            REGISTER_CALCULATED_WATER_TEMP_START, REGISTER_CALCULATED_WATER_TEMP_COUNT
+        )
+        if registers is None:
+            return None
+        return {i + 1: value / TEMP_SCALE_FACTOR for i, value in enumerate(registers)}
+
+    async def read_pump_active(self) -> dict[int, bool] | None:
+        """Read pump active status from register 7615 bitmask.
+
+        Returns dict of pump_id (1-8) -> is_active (True/False).
+        Bit 0 = pump 1, bit 7 = pump 8.
+        """
+        registers = await self.read_registers(REGISTER_PUMP_ACTIVE, 1)
+        if registers is None:
+            return None
+        bitmask = registers[0]
+        return {i + 1: bool(bitmask & (1 << i)) for i in range(8)}

custom_components/rdz_hmi_control/number.py

@@ -0,0 +1,129 @@
+"""Number platform for RDZ HMI Control integration."""
+
+from __future__ import annotations
+
+import logging
+from typing import Any
+
+from homeassistant.components.number import NumberEntity, NumberMode
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant, callback
+from homeassistant.helpers.device_registry import DeviceInfo
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.helpers.update_coordinator import CoordinatorEntity
+
+from .const import (
+    DATA_TIME_SETTINGS,
+    DOMAIN,
+)
+from .coordinator import RDZDataUpdateCoordinator
+
+_LOGGER = logging.getLogger(__name__)
+
+# Time setting configurations: (key, name, min, max)
+TIME_SETTINGS = [
+    ("day", "Day", 1, 31),
+    ("month", "Month", 1, 12),
+    ("year", "Year", 2000, 2099),
+    ("hour", "Hour", 0, 23),
+    ("minute", "Minute", 0, 59),
+]
+
+
+async def async_setup_entry(
+    hass: HomeAssistant,
+    config_entry: ConfigEntry,
+    async_add_entities: AddEntitiesCallback,
+) -> None:
+    """Set up RDZ HMI number entities from a config entry."""
+    coordinator: RDZDataUpdateCoordinator = hass.data[DOMAIN][config_entry.entry_id]
+
+    entities: list[NumberEntity] = []
+
+    # Add time setting number entities
+    for key, name, min_val, max_val in TIME_SETTINGS:
+        entities.append(
+            RDZTimeSettingNumber(coordinator, key, name, min_val, max_val)
+        )
+
+    async_add_entities(entities)
+
+
+class RDZTimeSettingNumber(CoordinatorEntity[RDZDataUpdateCoordinator], NumberEntity):
+    """Representation of an RDZ HMI time setting number entity."""
+
+    _attr_has_entity_name = True
+    _attr_mode = NumberMode.BOX
+
+    def __init__(
+        self,
+        coordinator: RDZDataUpdateCoordinator,
+        setting_key: str,
+        setting_name: str,
+        min_value: int,
+        max_value: int,
+    ) -> None:
+        """Initialize the time setting number entity.
+
+        Args:
+            coordinator: The data coordinator.
+            setting_key: The key in the time settings dict (day, month, year, hour, minute).
+            setting_name: The display name for the entity.
+            min_value: The minimum allowed value.
+            max_value: The maximum allowed value.
+        """
+        super().__init__(coordinator)
+        self._setting_key = setting_key
+
+        self._attr_unique_id = f"{DOMAIN}_{coordinator.client.host}_time_{setting_key}"
+        self._attr_translation_key = f"time_{setting_key}"
+        self._attr_name = setting_name
+        self._attr_native_min_value = min_value
+        self._attr_native_max_value = max_value
+        self._attr_native_step = 1
+
+        # Place on the System device
+        self._attr_device_info = DeviceInfo(
+            identifiers={(DOMAIN, f"{coordinator.client.host}_system")},
+            name="RDZ HMI System",
+            manufacturer="RDZ",
+            model="HMI Control System",
+            sw_version="1.0",
+        )
+
+    @property
+    def native_value(self) -> float | None:
+        """Return the current value."""
+        if self.coordinator.data is None:
+            return None
+        time_settings = self.coordinator.data.get(DATA_TIME_SETTINGS, {})
+        if time_settings is None:
+            return None
+        return time_settings.get(self._setting_key)
+
+    async def async_set_native_value(self, value: float) -> None:
+        """Set the value."""
+        int_value = int(value)
+
+        # Call the appropriate setter method on the coordinator
+        setter_methods = {
+            "day": self.coordinator.async_set_time_day,
+            "month": self.coordinator.async_set_time_month,
+            "year": self.coordinator.async_set_time_year,
+            "hour": self.coordinator.async_set_time_hour,
+            "minute": self.coordinator.async_set_time_minute,
+        }
+
+        setter = setter_methods.get(self._setting_key)
+        if setter is None:
+            _LOGGER.error("Unknown time setting key: %s", self._setting_key)
+            return
+
+        success = await setter(int_value)
+        if not success:
+            _LOGGER.error("Failed to set time %s to %d", self._setting_key, int_value)
+
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        self.async_write_ha_state()

custom_components/rdz_hmi_control/select.py

@@ -0,0 +1,140 @@
+"""Select platform for RDZ HMI Control integration."""
+
+from __future__ import annotations
+
+import logging
+from typing import Any
+
+from homeassistant.components.select import SelectEntity
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant, callback
+from homeassistant.helpers.device_registry import DeviceInfo
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.helpers.update_coordinator import CoordinatorEntity
+
+from .const import (
+    CONF_ZONE_NAME,
+    CONF_ZONES,
+    DATA_ZONE_MODES,
+    DOMAIN,
+    ZONE_MODE_MAN,
+    ZONE_MODE_OFF,
+    ZONE_MODE_OPTIONS,
+    ZONE_MODE_PGM,
+    ZONE_MODE_PGM_MAN,
+)
+from .coordinator import RDZDataUpdateCoordinator
+
+_LOGGER = logging.getLogger(__name__)
+
+# Reverse mapping from option string to mode value
+ZONE_MODE_VALUES = {v: k for k, v in ZONE_MODE_OPTIONS.items()}
+
+
+async def async_setup_entry(
+    hass: HomeAssistant,
+    config_entry: ConfigEntry,
+    async_add_entities: AddEntitiesCallback,
+) -> None:
+    """Set up RDZ HMI zone mode select entities from a config entry."""
+    coordinator: RDZDataUpdateCoordinator = hass.data[DOMAIN][config_entry.entry_id]
+    zones_config = config_entry.data.get(CONF_ZONES, {})
+
+    entities = []
+    for zone_id_str, zone_data in zones_config.items():
+        zone_id = int(zone_id_str) if isinstance(zone_id_str, str) else zone_id_str
+        entities.append(RDZZoneModeSelect(coordinator, zone_id, zone_data))
+
+    async_add_entities(entities)
+
+
+class RDZZoneModeSelect(CoordinatorEntity[RDZDataUpdateCoordinator], SelectEntity):
+    """Representation of an RDZ HMI zone mode select entity."""
+
+    _attr_has_entity_name = True
+    _attr_options = list(ZONE_MODE_OPTIONS.values())
+
+    def __init__(
+        self,
+        coordinator: RDZDataUpdateCoordinator,
+        zone_id: int,
+        zone_data: dict[str, Any],
+    ) -> None:
+        """Initialize the zone mode select entity."""
+        super().__init__(coordinator)
+        self._zone_id = zone_id
+        self._zone_data = zone_data
+
+        self._attr_unique_id = (
+            f"{DOMAIN}_{coordinator.client.host}_{zone_id}_zone_mode"
+        )
+        self._attr_translation_key = "zone_mode"
+        self._attr_name = "Zone mode"
+
+        self._update_device_info()
+
+    def _update_device_info(self) -> None:
+        """Update device info from zone data."""
+        zones_config = self.coordinator.config_entry.data.get(CONF_ZONES, {})
+        zone_data = zones_config.get(str(self._zone_id), self._zone_data)
+        self._zone_data = zone_data
+
+        zone_name = zone_data.get(CONF_ZONE_NAME, f"Zone {self._zone_id}")
+
+        self._attr_device_info = DeviceInfo(
+            identifiers={(DOMAIN, f"{self.coordinator.client.host}_{self._zone_id}")},
+            name=zone_name,
+            manufacturer="RDZ",
+            model="HMI Thermostat",
+            sw_version="1.0",
+        )
+
+    @property
+    def current_option(self) -> str | None:
+        """Return the currently selected option."""
+        if self.coordinator.data is None:
+            return None
+
+        zone_modes = self.coordinator.data.get(DATA_ZONE_MODES, {})
+        mode_value = zone_modes.get(self._zone_id)
+
+        if mode_value is None:
+            return None
+
+        return ZONE_MODE_OPTIONS.get(mode_value, ZONE_MODE_OPTIONS[ZONE_MODE_OFF])
+
+    async def async_select_option(self, option: str) -> None:
+        """Change the selected option."""
+        mode_value = ZONE_MODE_VALUES.get(option)
+
+        if mode_value is None:
+            _LOGGER.error("Invalid zone mode option: %s", option)
+            return
+
+        success = await self.coordinator.async_set_zone_mode(self._zone_id, mode_value)
+        if not success:
+            _LOGGER.error("Failed to set zone mode for zone %d", self._zone_id)
+
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        self._update_device_info()
+        self.async_write_ha_state()
+
+    async def async_added_to_hass(self) -> None:
+        """When entity is added to hass."""
+        await super().async_added_to_hass()
+
+        # Listen for config entry updates
+        self.async_on_remove(
+            self.coordinator.config_entry.add_update_listener(
+                self._async_config_entry_updated
+            )
+        )
+
+    async def _async_config_entry_updated(
+        self, hass: HomeAssistant, entry: ConfigEntry
+    ) -> None:
+        """Handle config entry update."""
+        self._update_device_info()
+        self.async_write_ha_state()

custom_components/rdz_hmi_control/sensor.py

@@ -20,6 +20,10 @@ from homeassistant.helpers.update_coordinator import CoordinatorEntity
 from .const import (
     CONF_ZONE_NAME,
     CONF_ZONES,
+    DATA_CALCULATED_WATER_TEMPS,
+    DATA_DELIVERY_WATER_TEMPS,
+    DATA_DEW_POINTS,
+    DATA_OUTSIDE_TEMP,
     DATA_SUMMER_SETPOINTS,
     DATA_WINTER_SETPOINTS,
     DOMAIN,
@@ -38,7 +42,9 @@ async def async_setup_entry(
     coordinator: RDZDataUpdateCoordinator = hass.data[DOMAIN][config_entry.entry_id]
     zones_config = config_entry.data.get(CONF_ZONES, {})
 
-    entities = []
+    entities: list[SensorEntity] = []
+
+    # Zone-level sensors
     for zone_id_str, zone_data in zones_config.items():
         zone_id = int(zone_id_str) if isinstance(zone_id_str, str) else zone_id_str
         # Create winter and summer setpoint sensors for each zone
@@ -48,6 +54,19 @@ async def async_setup_entry(
         entities.append(
             RDZSetpointSensor(coordinator, zone_id, zone_data, "summer")
         )
+        # Create dew point sensor for each zone
+        entities.append(
+            RDZDewPointSensor(coordinator, zone_id, zone_data)
+        )
+
+    # System-level sensors
+    # Outside temperature sensor
+    entities.append(RDZOutsideTemperatureSensor(coordinator))
+
+    # Water temperature sensors (1-8 for each type)
+    for system_id in range(1, 9):
+        entities.append(RDZWaterTemperatureSensor(coordinator, system_id, "delivery"))
+        entities.append(RDZWaterTemperatureSensor(coordinator, system_id, "calculated"))
 
     async_add_entities(entities)
 
@@ -137,3 +156,186 @@ class RDZSetpointSensor(CoordinatorEntity[RDZDataUpdateCoordinator], SensorEntit
         """Handle config entry update."""
         self._update_device_info()
         self.async_write_ha_state()
+
+
+class RDZDewPointSensor(CoordinatorEntity[RDZDataUpdateCoordinator], SensorEntity):
+    """Representation of an RDZ HMI dew point sensor."""
+
+    _attr_has_entity_name = True
+    _attr_device_class = SensorDeviceClass.TEMPERATURE
+    _attr_state_class = SensorStateClass.MEASUREMENT
+    _attr_native_unit_of_measurement = UnitOfTemperature.CELSIUS
+    _attr_entity_category = EntityCategory.DIAGNOSTIC
+
+    def __init__(
+        self,
+        coordinator: RDZDataUpdateCoordinator,
+        zone_id: int,
+        zone_data: dict[str, Any],
+    ) -> None:
+        """Initialize the dew point sensor entity."""
+        super().__init__(coordinator)
+        self._zone_id = zone_id
+        self._zone_data = zone_data
+
+        self._attr_unique_id = (
+            f"{DOMAIN}_{coordinator.client.host}_{zone_id}_dew_point"
+        )
+        self._attr_translation_key = "dew_point"
+        self._attr_name = "Dew point"
+
+        self._update_device_info()
+
+    def _update_device_info(self) -> None:
+        """Update device info from zone data."""
+        zones_config = self.coordinator.config_entry.data.get(CONF_ZONES, {})
+        zone_data = zones_config.get(str(self._zone_id), self._zone_data)
+        self._zone_data = zone_data
+
+        zone_name = zone_data.get(CONF_ZONE_NAME, f"Zone {self._zone_id}")
+
+        self._attr_device_info = DeviceInfo(
+            identifiers={(DOMAIN, f"{self.coordinator.client.host}_{self._zone_id}")},
+            name=zone_name,
+            manufacturer="RDZ",
+            model="HMI Thermostat",
+            sw_version="1.0",
+        )
+
+    @property
+    def native_value(self) -> float | None:
+        """Return the sensor value."""
+        if self.coordinator.data is None:
+            return None
+
+        dew_points = self.coordinator.data.get(DATA_DEW_POINTS, {})
+        return dew_points.get(self._zone_id)
+
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        self._update_device_info()
+        self.async_write_ha_state()
+
+    async def async_added_to_hass(self) -> None:
+        """When entity is added to hass."""
+        await super().async_added_to_hass()
+
+        # Listen for config entry updates
+        self.async_on_remove(
+            self.coordinator.config_entry.add_update_listener(self._async_config_entry_updated)
+        )
+
+    async def _async_config_entry_updated(
+        self, hass: HomeAssistant, entry: ConfigEntry
+    ) -> None:
+        """Handle config entry update."""
+        self._update_device_info()
+        self.async_write_ha_state()
+
+
+class RDZOutsideTemperatureSensor(CoordinatorEntity[RDZDataUpdateCoordinator], SensorEntity):
+    """Representation of an RDZ HMI outside temperature sensor."""
+
+    _attr_has_entity_name = True
+    _attr_device_class = SensorDeviceClass.TEMPERATURE
+    _attr_state_class = SensorStateClass.MEASUREMENT
+    _attr_native_unit_of_measurement = UnitOfTemperature.CELSIUS
+    _attr_translation_key = "outside_temperature"
+    _attr_name = "Outside temperature"
+
+    def __init__(
+        self,
+        coordinator: RDZDataUpdateCoordinator,
+    ) -> None:
+        """Initialize the outside temperature sensor entity."""
+        super().__init__(coordinator)
+
+        self._attr_unique_id = (
+            f"{DOMAIN}_{coordinator.client.host}_outside_temperature"
+        )
+
+        # Place on the System device
+        self._attr_device_info = DeviceInfo(
+            identifiers={(DOMAIN, f"{coordinator.client.host}_system")},
+            name="RDZ HMI System",
+            manufacturer="RDZ",
+            model="HMI Control System",
+            sw_version="1.0",
+        )
+
+    @property
+    def native_value(self) -> float | None:
+        """Return the sensor value."""
+        if self.coordinator.data is None:
+            return None
+        return self.coordinator.data.get(DATA_OUTSIDE_TEMP)
+
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        self.async_write_ha_state()
+
+
+class RDZWaterTemperatureSensor(CoordinatorEntity[RDZDataUpdateCoordinator], SensorEntity):
+    """Representation of an RDZ HMI water temperature sensor."""
+
+    _attr_has_entity_name = True
+    _attr_device_class = SensorDeviceClass.TEMPERATURE
+    _attr_state_class = SensorStateClass.MEASUREMENT
+    _attr_native_unit_of_measurement = UnitOfTemperature.CELSIUS
+
+    def __init__(
+        self,
+        coordinator: RDZDataUpdateCoordinator,
+        system_id: int,
+        temp_type: str,
+    ) -> None:
+        """Initialize the water temperature sensor entity.
+
+        Args:
+            coordinator: The data coordinator.
+            system_id: The system ID (1-8).
+            temp_type: Either "delivery" or "calculated".
+        """
+        super().__init__(coordinator)
+        self._system_id = system_id
+        self._temp_type = temp_type
+
+        self._attr_unique_id = (
+            f"{DOMAIN}_{coordinator.client.host}_{temp_type}_water_temp_{system_id}"
+        )
+
+        if temp_type == "delivery":
+            self._attr_translation_key = f"delivery_water_temp_{system_id}"
+            self._attr_name = f"Delivery water temperature {system_id}"
+        else:
+            self._attr_translation_key = f"calculated_water_temp_{system_id}"
+            self._attr_name = f"Calculated water temperature {system_id}"
+
+        # Place on the System device
+        self._attr_device_info = DeviceInfo(
+            identifiers={(DOMAIN, f"{coordinator.client.host}_system")},
+            name="RDZ HMI System",
+            manufacturer="RDZ",
+            model="HMI Control System",
+            sw_version="1.0",
+        )
+
+    @property
+    def native_value(self) -> float | None:
+        """Return the sensor value."""
+        if self.coordinator.data is None:
+            return None
+
+        if self._temp_type == "delivery":
+            temps = self.coordinator.data.get(DATA_DELIVERY_WATER_TEMPS, {})
+        else:
+            temps = self.coordinator.data.get(DATA_CALCULATED_WATER_TEMPS, {})
+
+        return temps.get(self._system_id)
+
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        self.async_write_ha_state()

custom_components/rdz_hmi_control/switch.py

@@ -14,6 +14,7 @@ from homeassistant.helpers.update_coordinator import CoordinatorEntity
 
 from .const import (
     DATA_SEASON,
+    DATA_SYSTEM_ACTIVATION,
     DOMAIN,
 )
 from .coordinator import RDZDataUpdateCoordinator
@@ -29,10 +30,14 @@ async def async_setup_entry(
     """Set up RDZ HMI switch entities from a config entry."""
     coordinator: RDZDataUpdateCoordinator = hass.data[DOMAIN][config_entry.entry_id]
 
-    entities = [
+    entities: list[SwitchEntity] = [
         RDZSeasonSwitch(coordinator),
     ]
 
+    # Add system activation switches (1-8)
+    for system_id in range(1, 9):
+        entities.append(RDZSystemActivationSwitch(coordinator, system_id))
+
     async_add_entities(entities)
 
 
@@ -91,6 +96,65 @@ class RDZSeasonSwitch(CoordinatorEntity[RDZDataUpdateCoordinator], SwitchEntity)
         if not success:
             _LOGGER.error("Failed to set season to winter")
 
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
+        self.async_write_ha_state()
+
+
+class RDZSystemActivationSwitch(CoordinatorEntity[RDZDataUpdateCoordinator], SwitchEntity):
+    """Representation of an RDZ HMI system activation switch."""
+
+    _attr_has_entity_name = True
+
+    def __init__(
+        self,
+        coordinator: RDZDataUpdateCoordinator,
+        system_id: int,
+    ) -> None:
+        """Initialize the system activation switch entity.
+
+        Args:
+            coordinator: The data coordinator.
+            system_id: The system ID (1-8).
+        """
+        super().__init__(coordinator)
+        self._system_id = system_id
+
+        self._attr_unique_id = f"{DOMAIN}_{coordinator.client.host}_system_{system_id}"
+        self._attr_translation_key = f"system_{system_id}"
+        self._attr_name = f"System {system_id}"
+        self._attr_icon = "mdi:power"
+
+        # Place on the System device
+        self._attr_device_info = DeviceInfo(
+            identifiers={(DOMAIN, f"{coordinator.client.host}_system")},
+            name="RDZ HMI System",
+            manufacturer="RDZ",
+            model="HMI Control System",
+            sw_version="1.0",
+        )
+
+    @property
+    def is_on(self) -> bool | None:
+        """Return True if the system is active."""
+        if self.coordinator.data is None:
+            return None
+        activation = self.coordinator.data.get(DATA_SYSTEM_ACTIVATION, {})
+        return activation.get(self._system_id)
+
+    async def async_turn_on(self, **kwargs: Any) -> None:
+        """Turn on the system."""
+        success = await self.coordinator.async_set_system_activation(self._system_id, True)
+        if not success:
+            _LOGGER.error("Failed to activate system %d", self._system_id)
+
+    async def async_turn_off(self, **kwargs: Any) -> None:
+        """Turn off the system."""
+        success = await self.coordinator.async_set_system_activation(self._system_id, False)
+        if not success:
+            _LOGGER.error("Failed to deactivate system %d", self._system_id)
+
     @callback
     def _handle_coordinator_update(self) -> None:
         """Handle updated data from the coordinator."""

hacs.json

@@ -0,0 +1,5 @@
+{
+  "name": "RDZ HMI Control",
+  "render_readme": true,
+  "homeassistant": "2024.1.0"
+}