more automation included

excess_pv_boiler/automations.yaml

@@ -1,70 +0,0 @@
-- alias: DHW Boiler Heater Relay Automation
-  description: >-
-    This automation makes sure the boiler auxiliary heater only works when the
-    boost is required and the heatpump aux heater is not on
-  triggers:
-    - trigger: state
-      entity_id:
-        - binary_sensor.dhw_use_boiler_aux_heater
-  conditions: []
-  actions:
-    - if:
-        - condition: state
-          entity_id: binary_sensor.dhw_use_boiler_aux_heater
-          state: "on"
-      then:
-        - type: turn_on
-          device_id: b6129664e9bea24cdab57a9c743b885d
-          entity_id: 1b7e7c5bd07a3823f8df13b623f95e0a
-          domain: switch
-      else:
-        - type: turn_off
-          device_id: b6129664e9bea24cdab57a9c743b885d
-          entity_id: 1b7e7c5bd07a3823f8df13b623f95e0a
-          domain: switch
-  mode: single
-
-- alias: DHW Manage PV Thermostat
-  description: Controls shadow thermostat based on PV excess availability
-  mode: restart
-  trigger:
-      # Trigger when PV power becomes sufficient (with delay)
-    - platform: state
-      entity_id: binary_sensor.dhw_pv_power_enough_for_aux_heater
-      to: "on"
-      for:
-        minutes: "{{ states('input_number.dhw_pv_excess_usage_start_delay')|int }}"
-      id: "turn_on"
-
-      # Trigger when PV power becomes insufficient (with delay)
-    - platform: state
-      entity_id: binary_sensor.dhw_pv_power_enough_for_aux_heater
-      to: "off"
-      for:
-        minutes: "{{ states('input_number.dhw_pv_excess_usage_stop_delay')|int }}"
-      id: "turn_off"
-  action:
-    - choose:
-        - conditions:
-            - condition: state
-              entity_id: input_boolean.dhw_use_excess_pv_for_aux_heater
-              state: "on"
-            - condition: trigger
-              id: "turn_on"
-          sequence:
-            - service: climate.set_temperature
-              target:
-                entity_id: climate.dhw_pv_excess_heating
-              data:
-                temperature: "{{ states('input_number.dhw_pv_target_temperature') | float }}"
-                hvac_mode: "heat"
-
-        - conditions:
-            - condition: trigger
-              id: "turn_off"
-          sequence:
-            - service: climate.set_hvac_mode
-              target:
-                entity_id: climate.dhw_pv_excess_heating
-              data:
-                hvac_mode: "off"

excess_pv_boiler/climate.yaml

@@ -1,23 +0,0 @@
-- platform: generic_thermostat
-  name: "DHW PV Excess Heating"
-  heater: input_boolean.boiler_pv_dummy_heater
-  target_sensor: sensor.boiler_temp
-  min_temp: 10
-  max_temp: 70
-  cold_tolerance: 1
-  hot_tolerance: 0.5
-  min_cycle_duration:
-    minutes: 2
-  initial_hvac_mode: "off"
-  precision: 0.1
-
-- platform: generic_thermostat
-  name: "Boiler Temperature"
-  heater: input_boolean.boiler_pv_dummy_heater  # Uses the dummy switch
-  target_sensor: sensor.boiler_temp  # Or whatever sensor you're using from heatpump
-  min_temp: 10
-  max_temp: 70
-  cold_tolerance: 4.0
-  hot_tolerance: 1.0
-  min_cycle_duration:
-    minutes: 2

excess_pv_boiler/input_boolean.yaml

@@ -1,20 +0,0 @@
-dhw_aux_heater_manual_override:
-  name: "DHW Aux Heater Manual Override"
-  icon: mdi:water-boiler
-
-dhw_allow_aux_heater_usage:
-  name: "DHW Allow Aux Heater Usage"
-  icon: mdi:check-circle
-
-dhw_use_excess_pv_for_aux_heater:
-  name: "DHW Use Excess PV for Aux Heater"
-  icon: mdi:solar-power
-
-dhw_allow_aux_heater_in_all_modes:
-  name: "DHW Allow Aux Heater in All Modes"
-  icon: mdi:thermostat
-
-# Dummy switch for shadow thermostat
-boiler_pv_dummy_heater:
-  name: "Boiler PV Dummy Heater"
-  icon: mdi:flash

excess_pv_boiler/input_number.yaml

@@ -1,23 +0,0 @@
-dhw_aux_heater_cut_off_temperature_threshold:
-  name: "DHW Aux Heater Cut-off Temperature Threshold"
-  min: 50
-  max: 85
-  step: 1
-  unit_of_measurement: "°C"
-  icon: mdi:thermometer-high
-
-dhw_aux_heater_temperature_threshold:
-  name: "DHW Aux Heater Temperature Threshold"
-  min: 1
-  max: 15
-  step: 0.5
-  unit_of_measurement: "°C"
-  icon: mdi:thermometer-lines
-
-dhw_pv_target_temperature:
-  name: "DHW PV Target Temperature"
-  min: 40
-  max: 70
-  step: 1
-  unit_of_measurement: "°C"
-  icon: mdi:solar-power

excess_pv_boiler/templates.yaml

@@ -1,42 +0,0 @@
-- binary_sensor:
-
-    - name: "DHW: Use Boiler Aux Heater"
-      unique_id: "dhw_config_use_boiler_aux_heater"
-      state: >
-        {% set manual_on = states('input_boolean.dhw_aux_heater_manual_override') == 'on' %}
-        {% set hp_aux_off = states('sensor.heat_pump_auxiliary_heater') != 'on' %}
-        {% set boiler_aux_allowed = states('input_boolean.dhw_allow_aux_heater_usage') == 'on' %}
-        {% set boiler_temp_ok = states('sensor.boiler_temp')|float < states('input_number.dhw_aux_heater_cut_off_temperature_threshold')|float %}
-        {# allowed checks if the resistance is permitted to run, mostly to check we're not running both boiler and HP resistance at the same time #}
-        {% set allowed = hp_aux_off and boiler_aux_allowed and boiler_temp_ok %}
-        {# here go various other conditions that influence the decision to run the boiler auxiliary heater #}
-        {# PV Excess to boiler - now using shadow thermostat #}
-        {% set pv_excess = states('input_boolean.dhw_use_excess_pv_for_aux_heater') == 'on' and 
-          state_attr('climate.dhw_pv_excess_heating', 'hvac_action') == 'heating' %}
-        {% set thermostat_activity_boost = state_attr('climate.boiler_temperature','preset_mode') == 'activity' and 
-            state_attr('climate.boiler_temperature','hvac_action') == 'heating'%} 
-        {% set thermostat_normal_boost = states('input_boolean.dhw_allow_aux_heater_in_all_modes') == 'on' and 
-            state_attr('climate.boiler_temperature','hvac_action') == 'heating'%}  
-        {{ manual_on or 
-          (allowed and (
-            pv_excess or
-            thermostat_activity_boost or 
-            thermostat_normal_boost
-          )) }}
-
-    - name: "DHW: PV Power Enough for Aux Heater "
-      unique_id: "dhw_pv_power_enough_for_aux_heater"
-      state: >
-        {% set phase_buffer = states('input_number.dhw_pv_excess_usage_buffer')|float / 3 %}
-        {% set phase_heater_power= states('input_number.dhw_aux_heater_power')|float /3 %}
-        {% set turn_on_threshold = -1*(phase_buffer+phase_heater_power) %}
-        {% if is_state('switch.boiler_heater_relay_switch_0', 'on') %}
-              {{ states('sensor.deye_12_external_ct1_power')|float <= 0 
-              and states('sensor.deye_12_external_ct2_power')|float <= 0
-              and states('sensor.deye_12_external_ct3_power')|float <= 0 }}
-            {% else %}
-              {{ states('sensor.deye_12_external_ct1_power')|float < turn_on_threshold 
-              and states('sensor.deye_12_external_ct2_power')|float < turn_on_threshold 
-              and states('sensor.deye_12_external_ct3_power')|float < turn_on_threshold }}
-            {% endif %}
-      device_class: power